Log in to help us in our mission, and to remove most ads from the browsing experience. They work differently, and theoretically they both have different purpose, one is to keep heat away and the other is to keep heat in. Now i need to know how much should be 2.5 downpipe length and after downpipe what tube size should i use for remain exhaust system (2 or 2.5)
April Blaze (@sweetcheeksblaze) • Instagram photos and videos
Stay with 2.5 or go 2 exhaust after 2.5 downpipe?
This problem may seem very simple to those who are more experienced, but one of the most common issues to new dsm owners is the recirculation hose from the diverter valve (aka blow off valve) back to the intake
Many times this hose is missing or blocked off to make the valve sound cool, but. If you where to have it fabricated for mild dom you would use 1 3/4 tube with a.120 wall If you where to have it made of 4130 you would use 1 3/4 tube with a.083 wall Who needs a front end anyway, look at my avatar
I just have a one piece welded hood and fenders Below a word (.doc) version is attached.(this guide is exactly what the title implies, a basic guide to tuning It is not intended to teach you, or tell you, everything needed to tune a dsm Research will be required to fully understand the terms, values.
The dipstick seal is made of a rubberzied plastic over the years they harden and shrink and no longer make a good seal to the tube
So if it follows the stick i would say your buddy is dew for a new stick or crimp the end of the tube Just the opposite is true If you have a bad seal you have less of a chance of popping out the dipstick. I have a tial 44mm wastegate and a dump tube that runs to the bottom of the car and sits a little lower than the oil pan
When the tow truck driver was taking the car back off the flatbed the dump tube caught the ground and rotated itself right into my lower intercooler pipe crushing it against the radiator drain valve. So i put together this wastegate dump tube off my 38mm tial wastegate My only problem is that it's way to loud When the wastegate opens, it sounds like i'm running open exhaust and it's not a very pleasant sound.so my question is, is there any way to.
526 12 nov 19, 2007 daytona, florida exhaust wrap on a intake pipe will actually raise the temp
Use a intake cover kit, which reflects radiant heat from the intake tube Exhaust wraps reduces underhood temperature
